Engineering opdrachten | 53 opdrachten
  • Director Engineering & Maintenance

    1 week geleden

    SIRE Life Sciences ® - Noord-Holland

    Currently we are looking for an individual ready to take up the challenges of Director Engineering & Maintenance. The purpose of this position is to ensure availability, functionality & reliability of production equipment, facilities & utilities to enable current and future production flow in a safe, quality and cost effective manner. Responsibilities Key Responsibilities: • Maintain all production equipment, facilities and utilities in an effective operating and compliant state • Ensure that changes to equipment and systems are carried out, qualified, and documented according to approved change control procedures and in compliance with relevant requirements. • Identify, develop and retain qualified people to provide Engineering and Maintenance services. Business Excellence: • Applies knowledge of industry best practices to provide inputs for increasing operational productivity within assigned area of work • Acts with customer needs in mind and considers customer service of paramount importance • Challenges and rethinks current operation methods • Keeps the team motivated, committed and engaged in times of change • Identifies and leads critical decisions at the same time that aligns the organization to support decisions for success • Recognizes urgent situations and reacts effectively and immediately (“sense of urgency”) Leadership Excellence: • Clearly articulates organizational goals and the role team members/peers play in achieving these goals • Delegates activities and accountabilities appropriately • Models leadership behaviors and guides team members/peers to further their growth and development • Supports team members’/peers’ needs for coaching and development • Gives team members/peers feedback on their performance and development openly and constructively , and recognizes excellent performance effectively • Identifies needs for future learning requirements and works with employees to close the gaps
    1 broker
  • Fill Finish Specialist

    1 week geleden

    SIRE Life Sciences ® - Zuid-Holland

    The individual operates at the technical interface with external partners. The main responsibility is to ensure proper and timely execution of outsourced manufacturing activities as defined in SOWs, in compliance with applicable quality standards. In addition, the individual is accountable and responsible for Process-Fit-2-Plant activities (in case of external partners), including confirmation and technology transfer runs. Furthermore, the individual is accountable and/or responsible for (parts of) outsourced process development, optimization, characterization and validation. These responsibilities will often be outsourced, preferably to the CMO that has been selected for manufacturing. Responsibilities • Accountable for proper and timely execution of outsourced manufacturing activities as defined in SOWs • Responsible for establishing and maintaining a trustful and professional relationship with the external partner • Responsible to participate in DPD sub team, ensuring alignment with project needs through Technical Integrator Manufacturing-related • Preparation phase o Contribute as required to CMO selection process (accountability/responsibility at Head of Production) o Responsible as technical SME for alignment with QA o Responsible for technical input for QAA, MSA and related SOWs o Responsible for the process description and Process-Fit-2-Plant activities, including confirmation and technology transfer runs o Responsible for review of the documentation prepared by the external partner that is required for manufacturing, and bringing it to the required quality level – ensuring the correctness of the documentation and ensuring a smooth flow through the Crucell QA system o Responsible for assessing the technical readiness of the external partner prior to starting manufacturing (accountability Head of Production) • Technical oversight manufacturing o Being physically present at the external partner during execution of key manufacturing step (person-in-plant), resolving issues on the spot and guiding corrective measures if required. o Responsible for informing/escalating timely to the Technical Integrator and the Head of Production, and SMEs as needed • Follow-up o Responsible for evaluating process performance and costs, providing input for CMO oversight metrics and process development, and sharing best practices with peers o Responsible for closing deviations and CAPAs, ensuring aligned expectations between our client and the external partner Process development-related • Accountable and responsible for process development, optimization, characterization and validation (including writing study plans and reports), and/or accountable and responsible for outsourcing of these activities to external partners
    1 broker
  • Electrical (Electromagnetic) Designer

    1 week geleden

    SIRE Life Sciences ® - Onbekend

    The Electrical EMC Designer is as professional responsible for demonstrating that our products complies with the international EMC standards (e.g. IEC60601-1-2). Next to the specialized EMC role, the electrical EMC designer is employable in the role of Electrical Designer. Responsibilities - Setup the test strategy and test plans to comply with EMC international standards in alignment with the norm compliance department. - Perform EMC (pre-)compliance tests in collaboration with the EMC lab - Direct and support suppliers with respect to EMC compliancy. - Consult and coach electrical designers in design solutions to comply with EMC. - Create the electrical design in easy to maintain and extendible parts (components and modules). You verify that the design and implementation complies with the system requirements. - Plays and dominant role in make-or-buy decisions. - Outsource electrical activities and deliverables to external suppliers and partners. You specify the assignment and requirements. You guide and monitor the supplier of partner during the development project and accept the products based on pre-defined acceptance criteria. - Build the electrical development plan and planning as input for the project plan in near corporation with the project manager. You drive the realization of this plan, by taking care that the planned deliverables are ready on time with the right quality. You lead the Electrical Engineers and Designers in the design and implementation and reviews their deliverables. - Formulate the technical roadmap for electrical products in near corporation with all stakeholders, taking into account technologies, tooling and application trends.
    1 broker
  • Senior Associate QA (GMP)

    1 week geleden

    SIRE Life Sciences ® - Noord-Brabant

    Perform QA support and oversight for equipment, automation and IS validation. This function does NOT develop the technical solutions. The QA validation specialist will work under supervision of qualified staff. Level of independency will vary based on familiarity with the subject (e.g. equipment, automation, etc). Responsibilities - Perform review and approval of equipment and automation validation documentation, ensuring that Corporate, Site and Regulatory requirements are met. - Keeps quality oversight on validation strategy and deliverables for specific projects. - Maintain a close contact and familiarity with several Quality systems. - Provide guidance and direction to Quality, Production, Warehouse/Distribution and Supply Chain staff in regards to compliance with quality policies, standards and procedures.
    1 broker
  • Maintenance Engineer/Werkvoorbereider

    1 week geleden

    SIRE Life Sciences ® - Zuid-Holland

    The Maintenance Engineer Work Preparation is responsible for maintenance being prepared and carried out. The engineer prepares the preventive and corrective maintenance that needs to be done. In cooperation with a technician he defines the scope of the work to be executed. Preparation includes (but is not limited to) arranging downtime slots, arrangement of materials and services, arrangement and agreement on the proper safety measures to be taken and to create the required permits to work. For scoping of activities, the engineer closely communicates with technicians, maintenance owners and system owners. Responsibilities • Determines the scope of the maintenance activities to be performed. • Arranges time slots for the maintenance activities to be executed. • Orders required materials and services. • Arranges required work permits. • Proposes and agrees safety measures (e.g. LOTO, PBM’s) to be taken. • Administratively closes orders including delivery of required documentation. • Hands over full package of documentation to maintenance owner and actively provides feedback on observations, potential improvements etc.
    1 broker
  • RELIABILITY LIFE TEST ENGINEER

    1 week geleden

    Onbekend - Gelderland

    FUNCTIE Basic knowledge of all applications running in the life test group and a specialist in more than one application area (RF, Audio, High Voltage, High Power, Analog, Digital) Perform a thorough risk analysis to determine a reliable Reliability life test setup (FMEA tool) Review of "Type of work instructions" serving trials properly implemented biased Demonstrated experience with project work Coordinates new life test projects based on available engineering capacity Knowledge of life infrastructure (equipment, facilities, software or materials) Initiates and pulls improvement actions that lead to improved performance (quality, knowledge, speed, cost) Maintains a network of contacts worldwide with reliability testing laboratories
    1 broker | Fulltime
  • SUPPLIER QUALITY (NPI) DEVELOPMENT ENGINEER

    3 weken geleden

    Onbekend - Veldhoven

    FUNCTIE As a Supplier Quality Development Engineer of New Product Introductions (NPI) your mission is to take the lead in a multidisciplinary team. From early supplier involvement until the product design and supplier process is mature enough to be released for volume your mission is to drive and secure quality performance between the supplier and the Development department of ASML. Your main focus areas, when guiding the development of the design between development programs and suppliers, are: Introducing new parts with technologically challenging requirements to the supplier (Co-) developing suppliers in new aspects for production (e.g. process- and qualification techniques) Interpreting supplier technology and manufacturability capabilities and drive early supplier involvement into the ASML design project, meanwhile considering balance between cost and quality Professionalizing ASML outsourcing management by involvement in Strategic sourcing teams All activities must be in line with the sector and business line targets. Early supplier involvement You participate in development projects in the early design phases to secure the manufacturability of the design and technology availability from suppliers and drive early supplier involvement. New Product Introduction Next to executing NPI deliverables at the suppliers (e.g. Manufacturing Flow, PFMEA, Control Plan, Spec agreement,…) you support them with difficult manufacturing issues (e.g. yield and quality improvements). Also assuring within ASML a transfer to the volume supply chain department afterwards. Supplier Development You represent the Quality and Technological aspects within a multidisciplinary team that manages and controls the Quality, Logistic, Technology and Cost targets of a supplier. At the supplier you manage and challenge manufacturing processes to be efficient and foolproof by using Six Sigma tools (e.g. MSA, Capability analysis,..). Furthermore, you identify non-conformities through auditing and drive subsequent implementation plans in cooperation with the supplier.
    1 broker | Fulltime
  • TECHNICAL AUTHOR

    3 weken geleden

    Onbekend - Veldhoven

    FUNCTIE You will be working in the department Mechanical Architecture, where you are responsible to create and maintain the technical communication needed to build and service our machines in the factory and field, based on the input of the manufacturing and equipment engineers. Your support structurally improves the quality and usability of our procedures. Responsibilities: Convert input from engineers and/or development documentation into effective technical documentation for ASML products according to the specifications and standards Create and modify procedures for factory and service operations Create and make changes to illustrations and convert illustrations to the required publishing format Use documentation tools and apply the ASML style to the created or modified documents Specify requirements concerning illustrations, technical input or user feedback Signal problems with technical documentation and propose scenarios for solutions or escalate Acts as a first point of contact on issues with documentation relating to the various projects and for handling incoming comments
    1 broker | Fulltime, Parttime
  • ERVAREN ENGINEER E/I GEZOCHT VOOR EEN INGENIEURSBUREAU IN DE INDUSTRIE

    4 weken geleden

    Onbekend - Regio Goes, Zeeland

    ENGINEER E/I GEZOCHT VOOR EEN Voor onze opdrachtgever, een multidisciplinair ingenieursbureau, zijn wij op zoek naar een ervaren Engineer E/I. In deze functie word je verantwoordelijk voor het samenstellen van instrumentatie pakketten en bijhorende budgetten en begrotingen. De organisatie is een ingenieursbureau welke is gespecialiseerd in grote industriële projecten. Je komt te werken op locatie in Zeeland voor een project omtrent een onderhoudsstop van een fabriek. Hier zal je variërende engineeringswerkzaamheden verzorgen omtrent de vervanging van diverse instrumentatie. De functie is met de intentie tot vast dienstverband maar is ook op freelance- en projectbasis in te vullen. TAKEN / WERKZAAMHEDEN Samenstellen van instrumentatie pakketten; Ontwerpen en uitwerken van klemmentekeningen; Ontwerpen en uitwerken van loops; Opstellen van de layout van besturingskasten; Opstellen van open begrotingen; Budget begrotingen opstellen t.b.v. de uitvoering.
    1 broker | Intentie vast dienstverband | startdatum: Per direct
  • FPGA DESIGNER

    1 maand geleden

    Onbekend - Eindhoven

    FUNCTIE Within the Electronics Department, we are looking for an enthusiastic Senior FPGA Designer who will work together with the existing teams in developing new embedded systems development methodologies for current and future Philips products. As senior designer you are responsible for: Working with a focus on consumer needs and technological competitiveness, keeping an outside-in approach in mind for the designs you create The design, realization, integration, and test of (embedded) systems or subsystems Adapting and improving you and your team to a world that is constantly changing around you Drawing up a personal schedule and reporting on progress in a structured and methodical way keeping the costs of the activities in line with the calculated budget Delivering input in the planning process to the project leader Ensuring that there is proper documentation to support the developed code Combining existing and/or purchased modules into components, which can be integrated into a working system Contributing to improvement initiatives with regard to technological improvements and future-oriented studies
    1 broker | Fulltime
  • MODELLEUR UTILITAIRE HVAC REGIO NIJMEGEN

    1 maand geleden

    Onbekend - Regio Nijmegen

    MODELLEUR HVAC GEZOCHT IN DE UTILITEIT VOOR EEN INGENIEURSBUREAU Voor onze opdrachtgever, een multidisciplinair ingenieursbureau, zijn wij op zoek naar een modelleur HVAC. In deze functie ben je verantwoordelijk voor het omzetten van 2D-tekeningen naar een 3D-model. Je zal betrokken zijn bij diverse projecten in de utilteit en industrie. De opdrachtgever is een toonaangevend ingenieursbureau. Deze Nederlandse organisatie is internationaal vertegenwoordigd met vestigingen over de hele wereld. De huidige functie zal worden ingevuld op de vestiging in de regio Nijmegen. Ben jij de (junior) modelleur die wij zoeken en spreekt de omschrijving je aan? Reageer dan direct! De functie is ook beschikbaar voor ZZP'ers. TAKEN / WERKZAAMHEDEN Opmaken van 3D modellen aan de hand van 2D tekeningen; Doorontwikkelen en standaardiseren van het coderingssysteem; Opstellen van delen van het bestek; Ondersteunen van de engineersafdeling, constructeurs en bij de installatie.
    1 broker | Intentie vast dienstverband | startdatum: In overleg
  • MODELLEUR ELEKTROTECHNIEK VOOR PROJECTEN IN DE UTILITEIT

    1 maand geleden

    Onbekend - Regio Nijmegen

    MODELLEUR ELEKTROTECHNIEK GEZOCHT IN DE UTILITEIT VOOR EEN INGENIEURSBUREAU Voor onze opdrachtgever, een multidisciplinair ingenieursbureau, zijn wij op zoek naar een modelleur elektrotechniek. In deze functie ben je verantwoordelijk voor het omzetten van 2D tekeneningen naar een 3D model. Je zal betrokken zijn bij diverse projecten in de utilteit en industrie. De opdrachtgever is een toonaangevend ingenieursbureau. Deze Nederlandse organisatie is internationaal vertegenwoordigd met vestigingen over de hele wereld. De huidige functie zal worden ingevuld op de vestiging in de regio Nijmegen. Ben jij de (junior) modelleur die wij zoeken en spreekt de omschrijving je aan? Reageer dan direct! De functie is ook beschikbaar voor ZZP'ers. TAKEN / WERKZAAMHEDEN Opmaken van 3D modellen aan de hand van 2D tekeningen; Doorontwikkelen en standaardiseren van het coderingssysteem; Opstellen van delen van het bestek; Ondersteunen van de engineersafdeling, constructeurs en bij de installatie.
    1 broker | Intentie vast dienstverband | startdatum: In overleg
  • ALLROUND ELEKTROMONTEUR

    1 maand geleden

    Onbekend - Zwolle

    FUNCTIE Het volledig installeren en onderhouden van alle productielijnen, machines en installaties bij onze opdrachtgevers. Op zowel mechanisch als elektrotechnisch gebied. Werken vanuit tekeningen en het oplossen van storingen. Advies kunnen geven aan zowel de opdrachtgevers als aan je directe collega's.
    1 broker | Fulltime
  • FREELANCE DESIGNER/CONSTRUCTEUR E/I

    1 maand geleden

    Onbekend - Botlek Rotterdam

    FREELANCE PROJECT BIJ ÉÉN PRODUCTIEPARTIJ IN DE BOTLEK Voor één van onze klanten, welke actief is in de vervaardiging van polypropyleen, is Dosign Freelance op zoek naar een instrumentatie en/of electrical designer/contstructeur voor een project van minimaal 4 maanden. In dit project ga je als zelfstandige het detail design van kleine plant changes maken. Daarnaast houd jij je bezig met het samenstellen van een zo duidelijk mogelijk werkpakket. TAKEN / WERKZAAMHEDEN Detail design, samenstellen van een zo duidelijk mogelijk werkpakket; Technische ondersteuning bieden op het gebied van E en/of I; Je bent daarnaast (deels) verantwoordelijk voor specificaties, ontwerp, besturing en inbedrijfstelling. OVER DOSIGN FREELANCE Dosign Freelance verbindt ZZP'ers/freelancers aan projecten binnen diverse branches. Jij profiteert als zelfstandige van ons netwerk dat we de afgelopen 30 jaar hebben opgebouwd en kunt rekeken op uitstekende contractuele afspraken. Één van de grote voordelen van Dosign Freelance is bijvoorbeeld dat wij standaard 14 dagen na facturatie uitbetalen aan jou, ongeacht welke betalingstermijn de opdrachtgever hanteert. Meer weten? Stel gerust je vraag aan een Dosign Adviseur!
    1 broker | 4 maanden project | startdatum: A.s.a.p.
  • Quality Engineer

    1 maand geleden

    Onbekend - Rotterdam

    To sustain and improve the Botlek and Maasvlakte management system in accordance with the corporate OE standards and external standards like ISO 9001, 14001, HACCP, GMP+. Drive a single and common management system through the integration of appropriate legislation and other and site- and corporate policies. . Develop and maintain the auditing plan, support external audits and inspections, coordinate follow up actions and provide relevant site metrics and reporting. It's an essential role in driving continual improvement within the BOMA organisation consistent with LyondellBasell Standards and legal requirements. - Implement and maintain the management system based on the corporate OE standards and valid external standards (such as ISO, HACCP) and integration with legislation and regulations - Maintain the BoMa Management System documentation; procedures and instructions based on OE, ISO and other requirements. Support the creation and amendments of procedures and documents and adherence to OE policies. - Execution of 3 yearly reviews of documentation and management system to ensure procedures are up to date. - Prepare, plan, organise, follow-up and evaluate internal and external audits (such as and not limited to ISO 9001/14001, GMP+/HACCP, BRZO, ILT of the Management System. - Coordination of quality related audits. - Conduct Internal audits according the internal auditing plan - Coordinate external audits and inspections within the BOMA organisation with authorities for OE audits, inspections, ISO audits, etc
    1 broker